china vacuum pumps,rotary vacuum pumps,vane vacuum pumps,rotary vane pumps,rotary vane vacuum pumps manufacturer & exporter and trade

Reasonable structure of the traditional group bags Spray powder, talcum powder into a whirlwind, two powder bags. If the choice is a powder Tornado, Tornado II is, and the use of two sets of fan, a fan of the wind than the larger, lower pressure, the secondary fan smaller than the wind, and high wind pressure, the two Taiwan ranked the total machine power and the traditional one the same fan power. With the traditional choice of a fan of comparison, the Cyclone II powder size becomes relatively small, both stainless steel materials savings, reduced investment, and convenient layout.

     Rational use of energy used for ventilation preheating of the inlet, and then the steam heating of the heated air of the condensed water into the air preheater to make full use of waste heat, so as to achieve the purpose of saving energy and reducing consumption.

Production in the dairy industry, a reasonable selection of advanced machinery and equipment, to ensure product quality, reduce operation and maintenance costs and increase the competitiveness of dairy products and economic efficiency, and promote the development of dairy industry and the technological advances of great significance. In liquid milk, the selection process for aseptic filling equipment and is particularly prominent, but there are also a selection of equipment to reduce operating costs. Industrial production of milk falling film evaporator design and selection of the traditional design of falling-film evaporator is the use of steam by increasing the number of (single-effect multi-effect variable) to achieve the purpose of saving energy and reducing consumption. However, the effect of an increase in the number of steel consumption increased by leaps and bounds, the cost is doubled, due to restrictions on heat transfer temperature difference, the increase in efficiency generally does not effect more than seven. With steam-jet pump, the use of hydraulic jet of double-effect falling film evaporator for the common falling-film evaporator design. Heat vacuum pump in the falling film evaporator used in the application of heat pump hot compression machine compression device for centrifugal and positive displacement compressors. Larger temperature difference between compression, generally around 11 ℃, which limits the use of mechanical compression heat pump efficiency generally does not exceed a maximum of three-way, the higher the boiling point of the solution increases when evaporation is limited, and the structure of complex, high cost , high maintenance costs, power consumption, and therefore the application of mechanical compression heat pump rarely.