china vacuum pumps,rotary vacuum pumps,vane vacuum pumps,rotary vane pumps,rotary vane vacuum pumps manufacturer & exporter and trade

   Reasonable choice of high-pressure pump high-pressure pump is generally the working pressure 14MPa, and generally choose to 25MPa high-pressure pump. Meet the needs of the flow as long as you choose. High-pressure pump factory, matching motor power is rated according to their design pressure and flow, and pressure is far lower than the rated pump pressure, so that the work flow, the pressure on the power than the rated output power is much smaller, if Choose a motor power to meet its needs when the output power compatible with the motor, you can reduce the total power drying system, reducing operating costs. Heilongjiang is a dairy products factory in accordance with security to do so. RPYP03-500-type drying unit, the traditional high-pressure pump model GJB1-25 type, matching motor power 7.5kw, and dairy products factory in accordance with an optional high-pressure pump with the model will be replaced by matching the electrical power is 5.5kw, this year 10,000 won for saving electricity, running has been good. Reasonable structure of the traditional group bags Spray powder, talcum powder into a whirlwind, two powder bags. If the choice is a powder Tornado, Tornado II is, and the use of two sets of fan, a fan of the wind than the larger, lower pressure, the secondary fan smaller than the wind, and high wind pressure, the two Taiwan ranked the total machine power and the traditional one the same fan power. With the traditional choice of a fan of comparison, the Cyclone II powder size becomes relatively small, both stainless steel materials savings, reduced investment, and convenient layout. Rational use of energy used for ventilation preheating of the inlet, and then the steam heating of the heated air of the condensed water into the air preheater to make full use of waste heat, so as to achieve the purpose of saving energy and reducing consumption.